Globe Valves are named for their spherical body shape with the two
halves of the body being separated by an internal baffle. Globe
valves may be used for either isolation or throttling service, by
installing the apporpriate disc: flat-seat disc for moderate
throttling, cage for more severe throttling, and parabolic plug for
linear flow control.
Globe valves are also classified by the body: regular staight
pattern, Y pattern and angle pattern. Their various configuration
allow them to be installed in a variety of piping configurations.
Globe valves are also supplied with three basic type of body-bonnet
closures: bolted bonnet, welded bonnet and pressure seal bonnet.
Bolted bonnet, the seal depends on the body-bonnet bolt preload to
maintain sufficient compressive force, bolted bonnet is widely used
for valves on various pressure ratings and sizes. Welded bonnet is
mainly applied for small-size forged steel gate valves, suitable
for applications requiring zero leakage on body-bonnet joint when
carrying hazardous system fluids. Pressure seal bonnet is adopted
for valves for high pressure service, typically in excess of 15 MPa
(2250 psi). The body-bonnet joint seals improves as the internal
pressure in the valve increases, compared to other constructions
where the increase in internal pressure tends to create leaks in
the body-bonnet joint.
Globe valves are supplied with flanged ends, butt weld ends, socket
weld ends and screwed ends, and are constructed with various
materials of cast carbon steel, stainless steel, alloy steels, and
Various combinations of seating and stem materials are available to
meet specific customer requirements.
Features of Cast Steel Globe Valves:
Straight Pattern Body Design
Swivel Plug Disc Design Standard
Flat and Regulating Type Disc Available
OS&Y, Rising Stem and Handwheel
Threaded-in Back Seat
Flanged or Butt-welding Ends
Gear or Actuator Available
Applicable Standards of Cast Steel Globe Valves:
a) Design&Manufacture: BS 1873, ASME B16.34
b) Face to Face: ASME B16.10, EN 558, BS2080
c) Connection End: ASME B16.5, ASME B16.25, EN 1092
d) Test and Inspection: API 598, EN 12266, BS 6755
Sizes: 1/2" - 12" or DN12 - DN300
Pressure Rating: Class150 - Class2500 or PN16 - PN420
Materials of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.
Operated by: Handwheel, Gear, Pneumatic, hydraulic and Electric actuator.
Would you like to get more products information or order it, please
call us, or click Inquiry Now to fill in the Form.
It helps you get more informations you need to trade confidently